1.Checking the Rotors and Tubes: Before you use, please check the rotors and tuber carefully.
2.Install Rotor: You must make sure the rotor is installed tightly before use.
3.Add Liquid in the tube and put the tube: The centrifugal tube should put symmetrically, otherwise, there will be vibration and noise because of imbalance. (Attention: the tube put should in even number, such as 2, 4, 6,8).
4.Lid close: Press down the door lid until you hear “clicking” sound which means the door lid pin enter into the hook.
5. Press the touch screen main interface to select the program.
6. Start and Stop the centrifuge.
7. Uninstall the rotor: When replacing the rotor, you should uninstall the used rotor, unscrewing the bolt with screwdriver and take out the rotor after removing spacer.
8. Shut off the Power: When the work is finished, then shut off the power and pull off the plug.
